timecode universal studio display recording indication indicator Studio Warning Lights Signs Lamp Strip USB

Primary Links:


Submitted by HS on Thu, 2006-11-02 12:41.

Overview

Submitted by HS on Fri, 2009-04-03 09:25.
The RECORDING Strip is a simple, compact light unit designed to fit in tight spots, and, with its strong magnetic base, to securely attach to any steel surface. It has to be connected to the PunchLight DLi, PunchLight GPI, PunchLight MIDI or the Relay SwitchBox either of which act as a trigger. It shines bright "RED" to indicate recording punch in/out. Typical usage is above door, at the entrance to the recording room, warning others that recording is in progress.

Features

Submitted by HS on Fri, 2009-04-03 09:26.
  • Magnet base recording indicator at an affordable price
  • Indicates recording (red) and record ready/preroll (yellow)
  • Sits atop monitor, shelf or desk
  • Connects to PunchLight GPI/Midi/DLi
  • Solid aluminium design - anodised black
  • Removable cable (10m) with 4P4C (RJ10) connectors included (different length on request)
  • Current consumption - 20 mA per colour
  • Size - 17,5cm x 4cm x 2cm, 6.9″ x 1.5″ x 0.87″
    (w x h x d)

Trigger Units

Submitted by HS on Fri, 2009-03-27 09:50.
PunchLight WLi
  • Switcher and power supply unit for the Recording Display, Recording PlexSign, Recording Lamp or Recording Ring
  • Connects directly to USB
  • LED indication of status on front panel
  • One 12V output for one external light
  • Transmits to unlimited "wireless" lights (currently via our W-CON RX receiver/s)
PunchLight DLi
  • Switcher and power supply unit for the Recording Display, Recording PlexSign, Recording Lamp or Recording Ring
  • Connects directly to USB
  • LED indication of status on front panel
  • One output for one Studio Display XT2 or SD2
  • Connects up to two light units in any combination
PunchLight MIDI
  • Switcher and power supply unit for the RECORDING Display, RECORDING PlexSign, RECORDING Lamp or RECORDING Ring
  • Connected to any MIDI interface
  • Two color LED indicates recording (red) and record ready/preroll (yellow)
  • HOLD buttons for manual switching RED and GREEN light
  • Connects up to three light units in any combination
PunchLight GPI
  • Switcher and power supply unit for the RECORDING Display, RECORDING PlexSign, RECORDING Lamp or RECORDING Ring
  • Connects to the GPI port of the SYNC I/O (or Universal Slave Driver)
  • Two-color LED indicates recording (red) and record ready/preroll (yellow)
  • HOLD buttons for manual switching RED and GREEN light
  • Connects up to three light units in any combination
Relay Switch Box USB
  • Control any other device, eg speakers, a microphone or even your own light system
  • Connects directly to USB port
  • Two relays with terminal plate
  • One 12V output for an external light